A SERVICE OF

logo

KK-XXX-06_INST_8-07
12
Remove screws holding the center
divider together where 3
rd
Compartment Bulkhead will be
mounted.
Item #5
Position 3
rd
Compartment
Ceiling into vehicle.
Item #12
Current view of installation
Slide the ceiling sections out of the way in order to access A/C hoses, wires, etc.
Note: These components will be hard to access once ceiling is mounted.
Remove all slack from hoses to maximize airflow.
Item #7 & #8
Item #7 & #8
Route dome light wires, HVAC
hoses, video cables, etc to their
respective locations
Item #8
Place Passenger-side Ceiling section
into vehicle
Do not attach any hardware at this time
Item #8
Remove 3
rd
Compartment
Bulkhead Emergency Exit
Hatch to ease installation.
Item #9
Position 3
rd
Compartment
Bulkhead as shown above.
Item #9