
G0572 Hanging Air Filter with Remote
-21-
The amount of use has a direct bearing on when
you must change the primary air filter and service
the secondary air filter.
To maintain optimal operation, checking the fil-
ters once a week in a small home shop is a good
habit. Checking them once a day during heavy
use will be important. Always wear a respirator
when checking the filters.
Filters
SECTION 6: MAINTENANCE
Keep the air filter unit
unplugged during all
maintenance procedures.
Ignoring this warning may
result in serious personal
injury to you or others!
Always wear a dust mask
and safety glasses when
servicing and changing
filters. Sawdust may
cause allergic reactions
or respiratory problems.
Figure 17. 5-Micron primary filter.
Figure 18. 1-Micron secondary filter.
Filter Retainer Latch
3. Remove the secondary filter and shake out the
wood dust until clean and wash out with warm
water and let dry (
Figure 18).
To change and service the filters:
1. Disconnect power to the hanging air filter!
2. Move the filter retainer latch upward, remove
the primary filter and discard it
(Figure 17).
NOTICE: DO NOT use compressed air to
blow out the secondary filter. If you do, you will
damage the filter and reduce filtering quality.
4. Vacuum out the inside of the air filter housing.
5. Reinstall the secondary filter when it is dry and
install a new primary filter.
6. Latch the filter retainer to keep the filters in
place.