34 35
/ Photo Mode
CAPTURING A SINGLE OR NIGHT PHOTO
1. Select the desired photo capture mode (Single or Night):
a. Press the
Power/Mode button [
] repeatedly until you get
to Photo mode.
b. Press the Settings/Tag button [
] to open the settings menu.
c. Press the Shutter/Select button [ ] repeatedly until you get
to the desired capture mode (Single or Night).
d. Press the Settings/Tag button [
] to close the settings
menu. The icon for the selected capture mode appears in the
upper le on your camera status screen.
2. Press the Shutter/Select button [
]. The camera beeps two
times, the camera status lights flash and the counter on the
camera status screen increases by one.
PRO TIP: For Night photo, be sure to use the right Shutter setting for
the situation. For details, see Shutter in Photo Settings.
CAPTURING CONTINUOUS PHOTOS
1. Select Continuous mode:
a. Press the
Power/Mode button [
] repeatedly until you get
to Photo mode.
b. Press the Settings/Tag button [
] to open the settings menu.
c. Press the Shutter/Select button [ ] repeatedly until you get
to Continuous.
d. Press the Settings/Tag button [
] to close the settings
menu. The Continuous icon [
] appears in the upper le on
your camera status screen.
2. Press and hold the Shutter/Select button [
]. The camera
beeps and the camera status lights flash repeatedly.
3. To stop capturing, release the Shutter/Select button [
]. The
counter on the camera status screen increases by one for every
photo captured.
/ Photo Mode
