6
Installation Preparation
Stainless Steel Interior Dishwasher
Materials You
Will Need:
(not supplied)
■■ 90° elbow (3/8" NPT external thread on one end and opposite
end to fit hot water supply line)
■■ Thread seal tape
■■ UL listed wire nuts (3)
For new installations only:
■■ Air gap for drain hose, if required
■■ Waste tee for house plumbing, if applicable
■■ Electrical cable or power cord, if applicable
■■ Screw type hose clamps
■■ Strain relief for electrical connection
■■ Hand shut-off valve (recommended)
■■ Water line 3/8" O.D. min. copper or 1/2" O.D. min plastic.
■■ Phillips head and flat blade screwdrivers
■■ Adjustable wrench (6")
■■ 3/8", 5/16" and 1/4" nut drivers
■■ Level
■■ Carpenter’s square
■■ Measuring tape
■■ Safety glasses
■■ Flashlight
For new installation only:
■■ Tubing cutter
■■ Drill and appropriate bits
■■ Hole saw set
Tools you
Will Need:
(Not Supplied)
Electrical Cable
or Power Cord
90° Elbow
Screw Type Clamps
Thread Seal
Tape
Hot Water Line
Wire Nuts
Air
Gap
Strain Relief
Waste
Tee
Coupler
Flat Blade Screwdriver
Nut Driver
Hole
Saw Set
Level
Measuring Tape
Drill
and Bits
Adjustable
Wrench
Phillips Head
Screwdriver
Flashlight
Safety Glasses
Square
Shut-Off
Valve
Tubing
Cutter
