HOW TO OPERATE YOUR CLOTHES WASHER
(continued)
Setting the Controls
@
Select
Options.
Use this control
if
you wish
to
change the water temperatures that
are automatically programmed by
the Fabric Care Selections control.
NORMAL–Leaves the
temperatures as programmed.
COLD WASH–Provides
cold
wash and rinse water in all cycles.
WARM RINSE–Leaves the
wash temperature as programmed
but provides warm rinse water in
Regular and
SPOTSCRUBBER
cycles.
To minimize setting of
wrinkles, cold rinse is automatically
provided in Permanent Press and
Special cycles.
C[~ntrolpune[
Clppe<]rcirzce
117(1>
L[lr)
.\li~ll/[\
Leave SPOTSCRUBBER
@
Push Cycle Selector knob
control at the double square
in and turn clockwise to
position.
your selected wash setting.
Select Extra Rinse,
if desired. Sliding
control to ON will
provide a second
deep rinse in the
Regular Cycle. If no
Extra Rinse is desired,
slide control to OFF.
Etira
Rinse
cycle
~
START ,
E
ON
OFF
3
/’
v
(
STOP
@
Pull Cycle Selector knob to
start the washer. To
change
setting after washer has
started, push Cycle Selector
knob in to stop washer and
reset to new position. Setting
can be changed at any time.
NOTE: To use the
SPOTSCRUBBER and MINI-
QUICK cycles, see MINI-QUICK
and SPOTSCRUBBER sections.
Tips to Help Select Settings for Regular Wash Loads
Regular
Cycles—
For most cottons, linens, and work and play clothes.
Longer wash times plus an extra deep rinse, spray
rinse and spin provide thorough washing and
detergent removal.
6
