HOW TO OPERATE YOUR CLOTHES WASHER
w
WARNING-To reduce the risk of fire, electric shock, or injury to persons when using your
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
WasMp;n
Speed
)
V8r;ab/e Wafer Leve/
Extra
R;nse CVcle
WasM;nse
hmp,
—
-
..)
Sorting and Loading
● Sort clothes carefully by fabric
●
Add measured amount of
Do not use the Filter-Flo pan as a
type, weight, color and amount of
detergent. See Detergents, Other
wash basket.
Do not put any items
soil, according to instructions in
Additives section for information
to be washed in the Filter-Flo pan.
How to Sort Clothes section.
on detergents and other laundry
● See How to Use Bleach
. . . .
● Remove the
Filter-Flo pan and
Mini-Basket tub.
The underside of
the lid is a good
place to
pu;the pan while loading
or unloading clothes.
Do not use the Mini-Basket tub
when washing regular loads.
You’ll find complete details on
how and when to use it in How to
Use the Mini-Basket Tub section.
addltlves.
● Load clothes into wash basket,
being careful not to overload.
Clothes
should
be below retaining
ring. See How to Load Your
Washer section for more
information.
●
Position the Filter-Flo pan on the
agitator. Lint
will
collect in the
pan for easy removal when the
wash is finished.
Dispenser section for information
on the Bleach Dispenser.
● See How to Use Fabric Softener
Dispenser section for more
information on the Fabric
Softener Dispenser.
● For information on bleaches and
fabric softeners, see Other
Laundry Products section.
●
Close the lid. Washer will fill
but not agitate or spin with the
lid open.
Setting the Controls
Use the Controls Setting Guide to help you make
the proper selections.
@
Select
WasMSpin
Speed.
~
Select Water Level.
SMALL: Washer is less than 1/3
full
of clothes.
MEDIUM: Between 1/3 and 1/2 full.
LARGE: Between
1/2
and 2/3
full.
EXTRA LARGE: Over 2/3 full.
MINI-BAS~T:
Not used for regular loads. See How
to Use the Mini-Basket Tub section.
If you want to increase water level after you’ve
made a selection, turn knob to RESET and
select new level.
@
Select Extra Rinse, if desired. Turning control
to ON will provide a second deep rinse in the
Regular Cycle. If no Extra Rinse is desired,
turn control to OFF.
@
Select Wash/Rinse Temperature. Cold rinse will
be automatically provided with use of Permanent
Press and Knits Cycles.
~
Push Cycle Selector knob in and turn clockwise
to your selected wash setting.
@
Pull Cycle Selector knob
out to start the washer.
If
you
wish to change
+
START ,
setting after washer
has started, push Cycle
Selector knob in to stop
the washer and reset to the
>
/ ‘\
‘
STOP
~
new position. Setting can be changed at any time.
5
