Installation
Washer
Instructions
If you have any questions, call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com.
In Canada,
visit www.geappliances or call 1.800.561.3344.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT – Save these instructions
for local inspector’s use.
•
IMPORTANT – Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time – 1-3 hours
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
WARNING
• This appliance must be properly grounded and
installed as described in these Installation Instructions.
• Do not install or store the appliance in an area where
it will be exposed to water/weather. See the Location
of Your Washer section.
• NOTE: This appliance must be properly
grounded, and electrical service to the washer
must conform with local codes and ordinances
and the latest edition of the National Electrical
Code, ANSI/NFPA 70.
FOR YOUR SAFETY:
14
TOOLS REQUIRED FOR
WASHER INSTALLATION
1/4 nut driver
3/8 socket with ratchet
3/8 open-end wrench
Adjustable wrench or 7/16 socket with ratchet
Adjustable wrench or 9/16 open-end wrench
Channel-lock adjustable pliers
Carpenter’s level
Water Hoses (2)
PARTS SUPPLIED
Cable Tie
Hose Guide
STACK BRACKET KIT
A stack bracket kit is available at additional cost.
It can be ordered in the United States by visiting
our website at GEAppliances.com or calling 800.
GE.CARES. Order kit #WE25X10018 or GEFLSTACK.
In Canada, please contact your nearest parts retailer.
