Graphics contained within this publication are for representation only. Your unit might differ slightly. 13
Chapter 2: The Remote Control
Find out if the remote can operate your TV
This remote control operates most RCA, GE, and Proscan TVs.
1. Press the TV button.
2. Press the ON•OFF button (if the TV turns on or off, this remote will
operate the TV.)
Tune to the TV’s Input Channel
To watch DVDs, the TV needs to be tuned to the Video Input channel
that corresponds with the jacks you used to connect the DVD Player to
the TV. If this remote operates your TV, do the following:
1. Press the TV button on the remote.
2. Press the INPUT button until you see the picture from the DVD
Player (the DVD main menu, or if a disc is playing you’ll see the
movie on the screen).
If this remote doesn’t operate your TV and you need more help finding
your Video Input channel, go to page 59.
