3-8
a) Set ship’s heading toward a suitable target (for example, ship or buoy) at a range
between 0.125 and 0.25 nautical mile.
b) Rotate the ENTER knob to bisect the target with the EBL and press the SET soft key
c) Press the RETURN soft key.
d) As a final test, move the boat towards a small buoy and confirm that the buoy shows up
dead ahead on the radar when it is visually dead ahead.
33. The next step is to set up external equipment. Press the NEXT soft key to show the NAV
SETUP menu.
POSITION SOURCE FURUNO BB GPS
SPEED (STW) SOURCE ETR
TEMPERATURE SOURCE ETR
DETPH SOURCE ETR
STW CALIBRATION +00%
TEMP CALIBRATION +00.0
°
F
DEPTH CALIBRATION +00ft
WIND AVERAGING 001 seconds(s)
WIND DIRECTION OFFSET S000.0
°
WIND SPEED CALIBRATION +00%
WIND (MWV) SOURCE FURUNO BB GPS
STW TEMP DEPTH
12.3 kt 56.3
°
F 99.5ft
WIND SPEED
1.2 kt
WIND DIR
131
°
AIR TEMPERATURE SOURCE FURUNO BB GPS
AIR PRESSURE SOURCE FURUNO BB GPS
STW TEMP DEPTH
12.3 kt 56.3
°
F 99.5ft
WIND SPEED
1.2 kt
WIND DIR
131
°
Page 1
Page 2
Installation wizard, nav setup
34. Choose item and press the EDIT soft key.
35. Choose appropriate setting and then press the ENTER soft key. Refer to the table on
next page for description of each item.
