3-11
Item Description Settings Default Setting
Disable
Satellite
Every GPS satellite is broadcasting
abnormal satellite number (s) in its
Almanac, which contains general orbital
data about all GPS satellites, including
those which are malfunctioning. Using
this information, the GPS receiver
automatically eliminates any
malfunctioning satellite from the GPS
satellite schedule. However, the
Almanac sometimes may not contain
this information. If you hear about a
malfunctioning satellite from another
source, you can disable it manually.
Enter satellite number (max. 3
satellites) in two digits and press the
ENTER soft key.
None
Latitude Set initial latitude position after cold
start. Use the N < - -> S soft key to
switch coordinate.
90°S - 90°N 45°35.000’N
Longitude Set initial longitude position after cold
start. Use the W <- - > E soft key to
switch coordinate.
180°E – 180°W 125°00.000W
Antenna
Height
Enter the height of the GPS antenna
unit above sea surface.
0-99 m 5 m
Fix Mode Choose position fixing method: 2D
(three satellites in view), 2D/3D (three
or four satellites in view whichever is
greater).
2D, 2D/3D 2D/3D
Cold Start Clears the Almanac to receive the latest
Almanac.
No, Yes No
