34 EN34 EN
EXTERNAL DEVICE RECORDING
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 33.
STANDBY-ON
TIMER SET
ABC DEF.@/:
JKL MNOGHI
TUV WXYZ
SPACETIMER CLEAR
SETUPDISC MENU
RETURNTITLE
TRACKING
VCR DVD
AUDIOREC
REC MODE D.DUBBING
CM SKIP
SEARCH RAPID PLAY
PQRS
SOURCE
123
456
78
0
OK
+--
o
p
B
B
iji
C
F
gh
s
9
DISPLAY OPEN/CLOSE
A
I
STANDBY-ON
SOURCE
OPEN/CLOSE
A
REC MODE
VCR DVD
1
Turn on the TV and press
[STANDBY-ON
yy], and be sure to
select the input of the TV to which
the unit is connected.
2
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes a while to load
the disc.
When you want to record to a
cassette tape:
Press [VCR].
Insert the cassette tape with a erase-
protection tab into the cassette
compartment.
3
Select the input of the unit which the
external device is connected. (E2 or
E1)
• To use the input jacks on the rear of this unit;
Select “E1 (Rear)” position by using [SOURCE].
• To use the input jacks on the front of this unit;
Select “E2 (Front)” position by using [SOURCE].
4
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 21 for DVD
or “Recording” on page 77 for VCR.
5
Press [RECORD] (DVD or VCR) on the
unit to start recording.
6
Start playback on the external device
to record from.
7
For disc:
Press [STOP C] on the unit to stop
recording.
For cassette tape:
Press [STOP C/EJECT A] on the unit
to stop recording.
This operation may take a
while to be completed.
2
17
7
5
5
E9E2ZUD_BZV420MW8.indd 34E9E2ZUD_BZV420MW8.indd 34 2007/09/04 17:05:482007/09/04 17:05:48
