CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
50
problem is not solved,
contact the support center.
Personal information deletion frame display
has been completed.
TABLE 6.10 Messages in the [Customer Information Review] window
Failed to make frame screen data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Invalid CGI parameter specified.
Failed to read setting file.(xxx)
This certificate cannot be verified up to a CA
certificate.
TABLE 6.11 Messages in the [Automatic registration state] window
Failed to make frame screen data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Invalid CGI parameter specified.
Automatic registration started.
Automatic registration completed.
Automatic registration failed. (xxx:xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
TABLE 6.12 Messages in the [Internet (Mail Only) connection environment settings] window
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Failed to make frame screen data.(xxx)
Invalid CGI parameter specified
Failed to get connect mode. (xxx)
Correct the entered value.
Input value is out of range.
Failed to get registration data (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Specify [UserID]/[Password]/[POP Server] all
when you specify POP server.
Correct the specified POP
server information.
Specify [UserID]/[Password] all when you
specify AUTH SMTP.
Correct the specified AUTH
SMTP information.
Execute registration of REMCS environment
data.
Click the [OK] or [Cancel]
button.
Failed to setting Machine status.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
