Operation, cont’d
MVX 128 A VGA Matrix Switchers • Operation
3-4
PRELIMINARY
Control buttons
d
Enter button and LED — The Enter button and LED have three primary
functions (•) and three secondary (❏) functions:
• Saves changes that you make on the front panel. To create a simple
confi guration:
Specify RGBHV, audio, or both (see I/O selection buttons [
h
] and
[
i
]).
Press the desired input button (
a
).
Press the desired output button(s) (
b
).
Press the Enter button.
• Indicates that a potential tie has been created but not saved.
• Indicates that a global preset has been selected to be saved or recalled but
that the preset action has not been accomplished.
❏ With the Preset, View, and Esc buttons, selects Serial Port Confi guration
mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-33.
❏ Selects 9600 baud for the RS-232/RS-422 port in Serial Port Confi guration
mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-33.
❏ Indicates that the RS-232/RS-422 port is set to 9600 baud in Serial Port
Confi guration mode. See Selecting the RS-232/RS-422 protocol and baud rate
on page 3-33.
e
Preset button and LED — The Preset button and LED have two primary
functions (•) and three secondary (❏) functions:
• Activates Save Preset mode to save a confi guration as a preset and Recall
Preset mode to activate a previously-defi ned preset.
• Blinks when Save Preset mode is active and lights steadily when Recall
Preset mode is active.
❏ With the Enter, View, and Esc buttons, selects Serial Port Confi guration
mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-33.
❏ Selects 19200 baud for the RS-232/RS-422 port in Serial Port Confi guration
mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-33.
❏ Indicates that the RS-232/RS-422 port is set to 19200 baud in Serial Port
Confi guration mode. See Selecting the RS-232/RS-422 protocol and baud rate
on page 3-33.
