A SERVICE OF

logo

Setting Up the Printer 1-3
2. If the printer has a serial interface, tighten the screws on both
sides of the cable connector.
If the printer has a parallel interface, squeeze the wire clips on
the printer together until they lock in place on both sides of the
connector.
3. Attach the other end of the cable to the computer.
Connecting the Drawer
WARNING:
Use a drawer that matches the printer specifications. Using
an improper drawer may damage the drawer as well as the
printer.
TM-T88II_eng_um.book Page 3 Thursday, August 29, 2002 6:11 PM