A SERVICE OF

logo

Optional multilingual character model supports printing with one of the
following characters:
To enable/disable the multilingual character code use the following
commands: (*)
a. B - Traditional Chinese (Big 5)
b. G - Simplify Chinese (GB)
c. K - Korean
d. J- Japanese Kanji (JIS)
FS & Select Multilingual Character Mode ON
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Enable multilingual character mode
-----------------------------------------------------------------------
FS . Select Multilingual Character Mode OFF
[Format] ASCII FS .
Hex 1C 2E
Decimal 28 46
[Description] Disable multilingual character mode
(*)Note: This command enable/disable the specific language according to
the model (B, G, K or J)
-32-