A SERVICE OF

logo

Load letterhead or pre-printed paper top edge first.
Do not load paper above the arrow mark inside the edge guide.
Check the paper package for any additional loading instructions.
Parent topic: Loading Media
Related references
Cut Sheet Media Loading Capacity
Related tasks
Loading Fine Art Media
Loading Posterboard and Thick Media
Selecting the Paper Settings for Each Source - Control Panel
Selecting the Default Paper Setup Display and Error Notice Settings
Loading Fine Art Media
Use the front manual feed tray and the rear paper support to load fine art media.
Note: You can load fine art media with a thickness of 0.012 to 0.028 inch (0.3 to 0.7 mm).
1. Turn on your product.
2. Remove any paper from the sheet feeder and close the paper support.
3. Remove any roll paper and the roll paper holders.
4. Open the rear paper support.
44