8/25
©SEIKO EPSON CORPORATION 2008-2009. All rights reserved.
6. 2 Menu bar
TMNet WinConfig provides the following menus and sub-menus.
Item Explanation
Configuration
Configures the network interface you have selected.
Launch Browser
When the IP address is set to something other than the factory
default, you can launch TMNet WebConfig with this. Normally you do
not need to use this.
Device
Exit
Exits TMNet WinConfig.
View Refresh
Updates the List view with the latest information by rescanning the
interfaces.
Timeout
Opens the Timeout window where you can set the timeout value.
See 6.2.1 Timeout for more information.
Search Paths
Opens the Search Paths window where you can set the paths for
searches.
See 6.2.2 Search Paths for more information.
Tool
Search Options
Opens the Search Options window for TCP/IP and COM where you
can set various search options.
See 6.2.3 Search Options for more information.
Help About TMNet
WinConfig
Displays the copyright and version information on TMNet WinConfig.
6. 2. 1 Timeout
This window can be opened by selecting Tool and then Timeout.
In this window, you can set the timeout time for communicating with a network interface. A communication
error occurs if this time is exceeded.
The following table explains in detail how this setup window works.
