Your Work Area
When choosing a location for your printer, follow these
guidelines:
❑
Place the printer on a flat, horizontal, stable surface. If the
printer is tilted, it cannot operate properly.
❑
Always leave approximately 2 inches of clear area next to
the knob on the printer’s right side. The printer will not
print if anything is pressing against the knob.
❑
Avoid places subject to rapid changes in temperature and
humidity. Also keep the printer away from direct sunlight,
strong light, or heat sources.
❑
Place the printer near a wall outlet where the plug can be
easily unplugged.
Note for French-speaking users:
Placez l’imprimante près d’une prise de contacte où la fiche
peut être débranchée facilement.
❑
Use a grounded power outlet; do not use an adapter plug.
If you plan to use a printer stand, follow these guidelines:
❑
Use a stand that supports at least 32 lb (14.8 kg).
❑
Never use a stand that tilts the printer. It should always be
kept level.
Setting Up
1-5
