SelecType
The
settings
you select using the SelecType panel remain valid even after
you turn off, reset, or initialize the printer.
FONT
Press this button to select draft, near
letter quality Roman, or near letter
quality Sans Serif. The indicator light
shows which font has been selected.
CHARACTERS PER INCH
Press this button to select the
characters per inch (cpi). You can
choose 10 CPI, 12 CPI, or PS
(proportional spacing). The indicator
light shows the selected character
spacing.
CONDENSED
Press this button to select either
condensed or normal printing. The
light is on when the printer is in
condensed mode. In this mode, all
characters are approximately 60% of
their normal width.
Note: Proportional spacing and condensed mode cannot be combined.
If you select both, only proportional spacing works.
3-4
Using the Printer
