Rev. B Consumable Specifications B-13
TM-L90/TM-L90 with Peeler Technical Reference Guide
B.2 TM-L90 with Peeler Roll Paper
This printer can use receipt roll paper and label roll paper with the following roll paper
specifications:
(*) Using roll paper with an inside diameter of 25.4 mm {1"} or less may decrease the detection accuracy of the roll
paper near-end sensor.
B.2.1 Receipt Roll Paper
The printer can use the following receipt paper:
❏ Receipt thermal paper with a thickness of 62 ~ 75 µm
B.2.1.1 Specified Original Roll Paper
The following original roll paper can be used:
The type number with (*) indicates that it is used for specified roll paper.
❏ Single-color thermal roll paper type no.:
(*) TF50KS-E (paper thickness: 65 µm) Nippon Paper Industries Co., Ltd.
TF60KS-E (paper thickness: 75 µm) Nippon Paper Industries Co., Ltd.
PD150R (paper thickness: 75 µm) Oji Paper Mfg. Co., Ltd.
PD160R (paper thickness: 75 µm) Oji Paper Mfg. Co., Ltd.
P350 (paper thickness: 62 µm) Kanzaki Specialty Paper (USA)
F5041 (paper thickness: 60 µm) Mitsubishi HiTec Paper Flensburg GmbH
(Germany)
KF50 (paper thickness: 62 µm) KANZAN Spezialpapiere GmbH (Germany)
Paper type Thermal paper
• Receipt paper (without black marks)
• Receipt paper (with black marks)
• Die-cut label paper (without black marks)
• Die-cut label paper (with black marks)
Form Roll paper
Paper width • 79.5 ± 0.5 mm {3.13 ± 0.02"}
• 37.5 ± 0.5 mm ~ 59.5 ± 0.5 mm
{1.48 ± 0.02 ~ 2.34 ± 0.02"}
Take-up roll paper width • 80 + 0.5/-1.0 mm {3.15 + 0.02/-0.04"}
• 38 ~ 70 mm +0.5/-1.0 mm {1.5 ~ 2.76 +0.02/-0.04"}
Roll paper spool diameter
(inside)
• Receipt paper: 12 {0.47"} mm or more (*)
• Die-cut label paper: 25.4 mm {1"} or more
Roll direction Printed side must face outside.
Be sure that roll paper does not have any cuts or tears at any place in the roll.
Roll end position Paper must not be pasted to the roll paper spool.
Outside diameter Outside roll paper diameter: Maximum 90 mm {3.54"}
