Epson Stylus Photo R2400
8 - Epson Stylus Photo R2400 2/05
❏ Load letterhead or preprinted paper into the printer top
edge first.
❏ Don’t load paper above the arrow on the left edge guide.
5. Adjust the left edge guide to fit lightly against the paper.
Note: The left edge guide moves out slightly, then moves back in as
the paper feeds into the printer. Do not adjust the guide during this
movement or during printing.
Loading Special Paper in the Sheet
Feeder
You can load these Epson ink jet papers in the sheet feeder as
follows:
* These matte papers require the matte sheet support when
loading multiple sheets 11 inches wide or wider; smaller paper
can be loaded without it. See page 8.
If the special paper has a cut corner, load the paper so the cut
corner is positioned as shown here. Check the paper package
for additional handling instructions.
Note: Always keep unused paper in the original package and store it
flat to prevent curling.
Loading Multiple Sheets of Matte Paper
If you are loading multiple sheets of the following papers in
sizes 11 inches wide or wider, attach the matte sheet support
to the top of the sheet feeder to help separate the sheets of
paper and prevent misfeeds:
❏ Epson Enhanced Matte Paper
❏ Epson Matte Paper Heavyweight
❏ Epson Double-Sided Matte Paper
1. Open the paper support and pull up its extensions.
2. Place the hook on the back of the matte sheet support over
the paper support extension, and hold the top extension
with one hand while sliding the matte sheet support all the
way down.
Note: Remove the matte sheet support when you load other types of
paper.
Paper type Loading capacity
Epson Enhanced Matte Paper*
Epson Matte Paper Heavyweight*
Epson Double-Sided Matte Paper*
Epson Premium Glossy Photo Paper
Epson Premium Semigloss Photo Paper
Epson Premium Luster Photo Paper
20 sheets (10 sheets
for A3 or Super B
sizes)
Epson Photo Quality Ink Jet Paper 100 sheets (50
sheets for A3 or
Super B sizes)
Epson Premium Bright White Paper 80 sheets
Epson Photo Quality Self Adhesive Sheets 1 sheet at a time
Cut corner
Matte sheet
support
