A SERVICE OF

logo

34
Testing and Connecting the Printer
Testing the Printer
To test whether the printer is set up correctly, print a status sheet.
The status sheet contains information about the printer and the
installed options, including the current settings. To print a status
sheet, follow the steps below.
Loading paper
1. Open the MP tray if it is closed against the body of the printer.
Pull out the extension tray if necessary.
2. Fan a stack of paper and tap it on a flat surface to even its
edges. With the printable side down, load the stack by
inserting it all the way into the tray. Adjust the guides to
match the size of your paper.