A SERVICE OF

logo

9.
Close the sprocket covers. Slide the sprocket units so that the
paper is straight and smooth, and then lock them into place.
10. Adjust the top of form position as described in in Chapter 2.
11. Press the FORM FEED button to form feed the paper out the back
of the printer. Make sure the edge of the first sheet emerges
below the paper separator.
12. Close the top cover and press the ON LINE button so you are
ready to print.
Removing the pull tractor
Follow these steps to remove the pull tractor. You’ll need a
cross-head screwdriver and the paper separator that originally
was installed on the printer.
1.
Remove any paper installed on the tractor and turn off the
printer.
6-14
Using the Printer Options