Using the Projector 15
Controlling Your Presentation
Use these settings to control the projector’s speaker volume, temporarily freeze the picture, or
turn off the picture and sound.
Adjusting the Volume
When an audio source is connected to the projector’s Audio port, use the and Volume
buttons on the projector or remote control to adjust the sound output from of the projector’s
speaker.
Freezing the Action
To freeze the action temporarily on the screen, press the
Still button on the remote control. This freezes any moving
images until you press the
Still button again.
Note: The sound from your video source continues to be heard
while the image is frozen. You need to press the pause button
on your video source if you wish to resume playback where
you stopped it.
Turning Off the Picture and Sound
You can use the A/V Mute button on the remote control to
darken your screen and turn off the sound.
■ To turn off the picture and sound, press the A/V Mute
button. The screen goes dark.
■ To turn the picture and sound back on, press the
A/V Mute button again.
Note: Your video source continues to play while the screen is dark. You should pause the video if
you wish to resume playback where you stopped it.
Still
button
A/V Mute
button
