Installing the software for Windows 3.1
Follow these steps to install the software using Windows 3.1:
1. Make sure Windows 3.1 is running and the Program
Manager window is open.
2. Insert the EPSON printer software CD shipped with your
printer in the CD-ROM drive. (If you use the floppy disk
version, insert it in a disk drive.)
3. From the File menu, choose
Run
. You see the Run dialog
box. In the Command Line box, type
D:\SETUP
. (If your
CD-ROM drive has a drive letter other than “D” or you are
using the floppy version, substitute the appropriate letter.)
Note:
If you wish to make a floppy disk version of the essential printer
software (printer driver, utilities, and online help) that comes on
your CD-ROM, type
EPSETUP
instead of
SETUP
. In the dialog
box that appears, click the
Driver disk creation utility
button
and follow the on-screen instructions.
4. Click
OK
. Select your printer icon in the EPSON Printer
Utility Setup dialog box.
3101
2
R
Hudson++ Ref. Guide
Rev.c
A5 size Chapter 2
03-04-97 DR, pass 0
Setting Up the Printer
2-19
