A SERVICE OF

logo

Removing the Card
Follow these steps if you need to remove the card:
1.
Make sure the printer is turned off.
2.
Remove the card by grasping it at the center and gently pulling
it straight out.
Never insert or remove the card while the printer is turned
3.
Turn on the printer.
If the CH. (EPL-7000/7100) or the FEED light is flashing, press
FEED; the printer then prints one page of data from the buffer.
Note: Never remove this card while the printer is on line, in
SelecType mode, or while resetting. If you do, a REINSERT
CARD, REMOVE CARD, or SERVICE REQ. message may appear
on the display. See the section on card error messages in your
printer manual.
Handing the PostScript CARD
1-7