Related references
Paper Jam Problems
Document Jams in the Automatic Document Feeder
Where to Get Help
Related tasks
Connecting a Telephone or Answering Machine
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load a few sheets of plain paper in the product.
3. Press the Menu button.
4. Press the up or down arrow buttons to select Maintenance and press the OK button.
You see this screen:
5. Press the up or down arrow buttons to select Nozzle Check and press the OK button.
6. Press the Start Color button.
After the nozzle pattern prints, you see this screen:
7. Do the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
209
