3.2. Camera Ports
The Camera features three ports and a Reset button.
y Antenna Connector : (IC-1500Wg only) Standard reverse
SMA connector where any antennas with reverse SMA
connector can connect to the Internet Camera.
y Power : Connect to the power adapter.
y LAN : Connect to the Ethernet network cable.
y Reset : If problems occur with your Internet Camera, press
the reset button with a pencil tip (for less than 2 seconds)
and the Internet Camera will re-boot itself, keeping your
original configurations.
If you experience extreme problems or you forget your
password, press the reset button for longer than 5 seconds to
reset the Internet Camera to the factory default settings
(warning: your original configurations will be replaced with the
factory default settings).
