January 2003
8-8
For more information visit: www.cutler-hammer.eaton.com CA08101001E
Safety Switches & Enclosed Circuit Breakers
8
Safety Switches
Flex Center Modifications
Vol. 1, Ref. No. [0246]
13. Special Crimp Lug Pads Factory Installed
for General Duty and Heavy Duty Switches
(Crimp Lugs are Not Included)
To order add Suffix CK to the standard
Safety Switch Catalog Number.
Table 8-17. Item 13
Heavy Duty Type DH Switches,
30 – 200A are adaptable to crimp lugs,
simply remove the box lugs.
14. Copper Lugs Factory Installed
Table 8-18. Item 14
To order, add Suffix CL to the standard
Safety Switch Catalog Number. The total
price is the standard switch price plus
the price adder from the table above.
Example:
DH221FGKCL
Heavy Duty, 2-Pole, 30A Fusible
Switch at 240V with Copper Lugs
Factory Installed = $80.00 (2 x $40.00)
Price U.S. $ Adder.
15. Equipment Ground Lugs Factory
Installed for General Duty and
Heavy Duty Switches
Table 8-19. Item 15
To order, add Suffix G to the standard
Safety Switch Catalog Number. The total
price is the standard switch price plus
the price adder from the table above.
16. Custom Lug Configurations
Customer-specified lug arrangements
are available on Heavy Duty and Double
Throw Safety Switches. Contact the
Safety Switch Flex Center for price
and lead time.
17. Auxiliary Contacts Factory Installed
Provide Early-Make/Early-Break Operation
Table 8-20. Item 17
To order 1NO/1NC contacts, add
Suffix 2 to the standard Safety Switch
Catalog Number.
To order 2 NO/2 NC contacts, add
Suffix 3 to the standard Safety Switch
Catalog Number.
The total price is the standard switch
price plus the price adder from the
table above.
Example:
DH423FGK2
Heavy Duty, 4-Pole, 100A Fusible
Switch at 240V with Factory Installed
1 NO/1 NC Contacts = $230.00 Price
U.S. $ Adder.
Example:
DT324FGK22
Double Throw, 3-Pole, 200A Fusible
Switch at 240V with two Factory
Installed Contacts (one installed in the
Normal ON position and one installed
in the Auxiliary ON position). = $460.00
(2 x $230.00) Price U.S. $ Adder.
18. Control Pole Factory Installed Provides
Late-Make/Early-Break Operation
The K-Series Control Pole provides
one Normally Open contact, late-
make, early-break operation. It mounts
in the exact location as the neutral
block using the same pre-drilled holes.
This is directly connected to the power
pole operating shaft. Direct connection
and visible blades provide more
secure electrical interlocking than
handle linkage operation of a snap/
switch type interlock. This reliability
meets the requirements of many
specifications for 4-pole switches
when the fourth pole is required
for secure electrical interlocking.
Table 8-21. Item 18
To order, add Suffix CP to the standard
Safety Switch Catalog Number. The total
price is the standard switch price plus
the price adder from the table above.
Example:
DH267FGKCP
Heavy Duty, 2-Pole, 800A Fusible Switch
at 480V with Factory Installed Control
Pole = $300.00 Price U.S. $ Adder.
19. How to Order
Step One:
Contact the Safety Switch
Flex Center for price and delivery on
product being modified. An authorized
negotiation (TSP) number will be
provided to track your order.
Safety Switch Flex Center
Phone: 1-888-329-9272
Fax: 1-423-478-0270
Step Two:
Enter the order on VISTA-
LINE™ by description (with catalog
number if it applies) and reference the
authorized negotiation (TSP) number.
Vista suffix will be “ETS.”
Product code will be “BE90.”
For order entry assistance, contact
CSC at:
Phone: 1-800-356-1243
Fax: 1-800-752-8602
20. How to Price
Step One:
Select catalog number
from Pages 8-14 through 8-39 of this
catalog or Vista of the switch that
needs to be modified.
Step Two:
Use the correct price (from
Vista or the current Price and Availabil-
ity Digest) of the switch that needs to
be modified. If no price exists, Flex
Center will provide one.
Step Three:
Refer to the modification
on Pages 8-6 through 8-8 for price
additions.
Example:
DT363URK = $2,530.00
Options:
Factory Installed
Neutral (N) = 280.00
Copper Lugs (CL) = 360.00
(3 x 120.00)
Total Price U.S. $ = $3,170.00
Step Four:
Contact the Safety Switch
Flex Center for authorized price and
lead time.
Note: Existing DSP, CSP and DOP pricing
does not apply.
For application, availability or pricing
questions, contact the Safety Switch
Flex Center at 1-888-329-9272.
Safety Switch
Ampere Rating
Factory Installed
Price U.S. $
Adder Per Pole
400
– 600
800
200.
300.
Safety
Switch
Ampere
Rating
Switch
Type
Factory Installed
Price U.S. $
Adder Per Pole
30 Heavy Duty
Double Throw
40.
55.
60 Heavy Duty
Double Throw
50.
65.
100 Heavy Duty
Double Throw
90.
120.
200 Heavy Duty 140.
400 General Duty
and Heavy Duty
300.
600 General Duty
and Heavy Duty
450.
Safety Switch
Ampere Rating
Factory Installed
Price U.S. $
Adder Per Switch
30
– 100
200
400
– 1200
100.
130.
225.
General Duty Switches 200 – 600A,
Non-Metallic 30 – 200A, Heavy Duty 30 – 1200A
and Double Throw Switches 30 – 800A
Safety
Switch
Ampere
Rating
Description Factory Installed
Price U.S. $
Adder
Per Switch
30
– 200 1 NO/1 NC
2 NO/2 NC
230.
260.
400
– 1200 1 NO/1 NC
2 NO/2 NC
360.
390.
Safety
Switch
Ampere
Rating
Switch
Type
Factory
Installed
Price U.S. $
Adder Per Switch
30 – 1200
30
– 200
400
– 600
Heavy Duty
Double Throw
General Duty
300.
300.
300.
Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . 22-CD
