Master Hub Setup and Management 69
If the hub stack has a backup master, the time required to complete the reset
process will be longer than without one. Generally, a stack reset should be
complete within about two minutes.
System Reset
To perform a system reset, follow these steps:
1.
Choose
System Reset
from the main menu. The following confirma-
tion message will appear:
DFE-2600 Stackable Hub - System Reset
Are you sure you want to reset? No Yes
2.
Move the cursor to
Yes
to confirm the reset and press
<Enter>.
After a few seconds delay, the hub should restart.
Factory Reset
Before performing a factory reset, be absolutely certain that this is what you
want to do. Once the reset is done, all of the master hub stored settings
