4 February 2005 Dodge Transmission Instructions
BD Engine Brake Inc.
Plant Address: #A10 – 33733 King Road, Abbotsford, BC, Canada V2S 7M9
US Shipping: #88 – 446 Harrison St., Sumas, WA, USA 98295 | US Mailing Address: P.O. Box 231, Sumas, WA, USA, 98295
Phone#: (604) 853-6096 | Fax: (604) 853-8749 | Web: www.dieselperformance.com
6
KICK-DOWN CABLE ADJUSTMENT
Kick-down cable adjustment is one of the most critical adjustments that affect the operation
of the transmission.
The BD Performance Valve Body is a performance product and not stock, therefore the
factory specifications for this adjustment are used only as a guide.
Your drivability and performance demands will determine your shift
points and pressure adjustments.
Kick down cable adjustments are for Full Throttle shift points & passing gear only. Light
Throttle shift points should be adjusted on the valve body throttle valve stop.
12 VALVE ADJUSTMENTS
On trucks equipped with the 12-valve 5.9 6BTA, full throttle shift between 2
nd
and 3
rd
should
occur between 2400 – 2500RPM (OEM) with the transmission at operating temperature.
IMPORTANT - Locate the kick-down cable and MARK THE CABLE at the original setting
before any adjustments are made.
MARK
HERE
NOTE: Disconnecting the cable from the support bracket and the throttle lever is a difficult
task; it may be easier to adjust without removing cable.
