A SERVICE OF

logo

Open as PDF
next previous
88
Specifying the zone used with the
main remote control unit
When the ZONE SELECTbuttonispressed,onlythesetzonecanbe
operated with the remote control unit.
1
Press and hold ZONE/DEVICE Z
for at least 3 seconds.
Thezonemodeindicatorashestwice.
2
Press ZONE SELECT.
Thezonemodeindicatorashestwice.
3
Press 1 – 3 to set.
Thezonemodeindicatorashestwice.
[Settable items]
1 When only using “MAIN ZONE”
2 Whenusing“MAINZONE”/
“ZONE2”
3 Whenusing“MAINZONE”/
“ZONE2”/“ZONE3”(Default)
Resetting the remote control unit
Settings for the remote control unit are returned to the default values.
1
Press and hold ZONE/DEVICE Z
for at least 3 seconds.
Thezonemodeindicatorashestwice.
2
Press 9, 8 and 1, in that order.
J indicator flashes four times.
All the settings are restored to their
defaults.
Basic version
Advanced version
Information
Advanced version
BD