0
Getting Started Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications
Speaker Connections
w q
w q
(R)
(L)
w q
w q w q
(L) (R)
*/
w qw q
(L) (R)
The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and
a monitor.
Speaker Installation
Subwoofer Center speaker
Surround speakers
Front speakers
Place the front speakers to the
sides of the monitor or screen and
as flush with the screen surface as
possible.
The table below shows a typical speaker configuration for the AVR-1909.
Surround back speakers
Speaker Connections
Example: 5.1/7.1-channels
Front speakers
A
Center speakerSubwoofer
Subwoofer
with built-
in amplifier
Surround speakers
b L : Left
R : Right
FRONT
CENTER
SURROUND SURROUND BACK
SUBWOOFER
L R L R L R 1 speaker
7.1-channels
(FRONT A+B)
S S S S S S S
–
S
7.1-channels
S S S S S S S
–
S
6.1-channels
S S S S S
– –
S S
5.1-channels
S S S S S
– – –
S
3.1-channels
S S S
– – – – –
S
2.1-channels
S S
– – – – – –
S
2-channels
S S
– – – – – – –
NOTE
For surround back speakers :
• Since “Amp Assign” of AVR-1909 is set to “ZONE2” by default, audio is not output from the surround
back speakers. When using the surround back speakers with MAIN ZONE, change the “Amp Assign”
setting to “7.1ch” (vpage 35).
• When using just one surround back speaker, connect it to the left channel (SBL).
For ZONE2 speakers :
• For multi-zone connection and operation, see “Amp Assign / Multi-zone Connections and Operations”
(vpage 69 ~ 72).
0
Getting Started Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Surround back
speakers
When surround back
speakers are connected
Connections
