Adding and Replacing Parts 103
Wireless Mini-Card
If you ordered a Mini-Card with your computer, the card is already installed.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1
Follow the procedures in "Before You Begin" on page 89.
2
Remove the hinge cover. See "Hinge Cover" on page 100.
3
Remove the keyboard. See "Keyboard" on page 101.
4
If a Mini-Card is not already installed, go to step 5. If you are replacing a
Mini-Card, remove the existing card:
a
Disconnect the two antenna cables from the Mini-Card.
1 Mini-Card 2 antenna cable connectors (2)
2
1
book.book Page 103 Friday, October 19, 2007 2:03 PM
