A SERVICE OF

logo

Camera
Removing the Camera
1. Follow the procedures in Before Working on Your Computer.
2. Remove the Secure Digital (SD) card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display bezel.
6. Disconnect the camera cable from the camera module.
7. Using a plastic scribe, pry the camera to release it from the display back cover.
NOTE: To replace the camera, see Installing The Camera.
Installing the Camera
NOTE: To remove or locate the camera, see Removing The camera .
1. Connect the camera cable to the camera.
2. Secure the camera to the display cover.
3. Replace the display bezel.
4. Replace the battery.
5. Replace the base cover.
6. Replace the Secure Digital (SD) card.
31