Troubleshooting Your System 163
3
Remove the following components from the system. See "Installing
System Components" on page 79.
• Cooling shroud
• Hard drives
•SD cards
• USB memory keys
• NIC hardware key
• Internal SD module
• Expansion cards
• iDRAC6 Enterprise card
• iDRAC6 Express card
• Power supplies
•Fans
• Processors and heat sinks
• Memory modules
4
Reinstall the processors and heat sinks, memory modules, power supplies,
and cooling shroud.
5
Close the system. See "Closing the System" on page 86.
6
Place the system upright and on its feet on a flat and stable surface,
reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
7
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 193.
8
If the system starts properly, shut down the system and reinstall the rest of
the components that you removed. See "Installing System Components"
on page 79.
9
Run the appropriate online diagnostic test. See "Running the System
Diagnostics" on page 181.
If the tests fail, see "Getting Help" on page 193.
book.book Page 163 Monday, June 15, 2009 11:33 AM
