![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/55/855b4541-6e84-48f2-8480-812fc4637cea/855b4541-6e84-48f2-8480-812fc4637cea-bg5d.png)
Using Your Projector 93
Wireless Setup
• Choose
Enable
to set up the
Region
,
SSID
,
SSID Broadcast
,
Frequency
Band
,
Channel
,
Encryption
, and
Key
. Choose
Disable
to disable the
wireless set up.
SSID
: Up to maximum length of 32 characters.
Encryption
: You can disable WPA key or select one of 64-bit or 128-
bit in ASCII or HEX string.
Key
: If Encryption is enabled, you have to set key value according to
the Encryption mode you selected.
RADIUS Server Setup
• Set up the IP address, Port, and Key information.
GateKeeper
• There are three options:
All Pass
: Allow users to access the office network via the wireless
projector.
All Block
: Block users from accessing the office network via the
wireless projector.
Internet Only
: Block users from the office network, but still reserve
Internet connection capability.
Set Security For SNMP
• Setup Write Community information.
Click the
Apply
button to save and apply changes. The projector must be
restarted for the changes to take effect.