Troubleshooting Your System 173
• Vflash media cards
• USB memory keys
• NIC hardware key
• Expansion-card riser
• Integrated storage controller card
• iDRAC6 Express card
• iDRAC6 Enterprise card
• Power supplies
•Fans
• Processors and heat sinks
• Memory modules
4
Let the system dry thoroughly for at least 24 hours.
5
Reinstall the components you removed in step 3.
6
Close the system. See "Closing the System" on page 89.
7
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 199.
8
If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 124.
9
Run the appropriate online diagnostic test. See "Using Online Diagnostics"
on page 189.
If the tests fail, see "Getting Help" on page 199.
book.book Page 173 Friday, November 20, 2009 2:56 PM
