A SERVICE OF

logo

Installing the Power Connector
1. Insert the power connector in its slot on the computer chassis.
2. Place the metal bracket on the power-connector port.
3. Tighten the screws to secure the power-connector port to the computer chassis.
4. Install:
a. system board
b. system fan
c. speaker
d. I/O board
e. coincell battery
f. camera
g. display assembly
h. hinge cover
i. WLAN card
j. WWAN card
k. hard drive
l. palmrest
m. keyboard
n. keyboard trim
o. base cover
p. battery
5. Follow the procedures in After Working Inside Your computer.
36