A SERVICE OF

logo

Open as PDF
next previous
4. Remove the screws that secure the optical-drive bracket to the optical drive. Remove the optical-drive bracket
from the optical drive.
Installing the Optical Drive
1. Place the optical-drive bracket on to the optical drive.
2. Tighten the screws to secure the optical-drive bracket to the optical drive.
3. Slide the optical drive into the drive bay in the computer.
4. Tighten the screw to secure the optical drive to the computer.
5. Install the battery.
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the Keyboard
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the battery.
3. Release the keyboard by pressing the tabs on the palmrest.
14