Error Code Message Information
Action Replace the failed SD card.
RFM1202
Message Internal Dual SD Module redundancy is degraded.
Details Either one of the SD card or both the SD cards are not functioning properly.
Action Replace the failed SD card.
RFM1203
Message Internal Dual SD Module is not redundant.
Details Internal Dual SD Module is not redundant.
Action Install additional SD card and configure for redundancy if redundancy is desired.
RFM1205
Message Internal Dual SD Module is not redundant. Insufficient resources to maintain normal
operations.
LCD Message Internal Dual SD Module is not redundant. Insufficient resources. Check SD Card.
Details The current operating configuration cannot maintain redundancy. The unit may operate
in a degraded state.
Action Review this manual and SD card configuration.
RFM2001
Message Internal Dual SD Module <
name
> is absent.
LCD Message Internal Dual SD Module <
name
> is absent. Check SD Card.
Details The SD card module is not detected or not installed.
Action If unintended, reinstall the SD module.
RFM2002
Message Internal Dual SD Module <
name
> is offline.
Details The SD card module is installed but may be improperly installed or configured incorrectly.
Action Reinstall the SD module.
RFM2004
Message Failure detected on Internal Dual SD Module <
name
>.
LCD Message Internal Dual SD Module <
name
> failed. Check SD Card.
Details The SD card module is installed but improperly configured or failed to initialize.
Action Reinstall the SD module and remove and reinstall SD cards.
RFM2006
Message Internal Dual SD Module <
name
> is write protected.
Details The module is write-protected. Changes may not be written to the media.
Action If unintended, remove the media and disable write protection.
SEC0000
Message The chassis is open.
111
