Dell M4700 Manual

A SERVICE OF

next previous

g) palmrest

3. Disconnect the switch-board cable from the system board and remove it from the latches. Remove the screws that

secure the switch board to the computer and remove it from the computer.

Installing the Switch Board

1. Align the switch board to its original position on the computer.

2. Tighten the screws to secure the switch board to the computer.

3. Connect the switch-board cable to the system board and secure it through the routing channel.

4. Install the:

a) palmrest

b) hard drive

c) optical drive

d) keyboard

e) keyboard trim

f) base cover

g) battery

5. Follow the procedures in

After Working Inside Your Computer

.

Removing the Unified Security Hub (USH) Board

1. Follow the procedures in

Before Working Inside Your Computer

.

2. Remove the:

a) battery

b) base cover

c) keyboard trim

d) keyboard

e) optical drive

f) hard drive

g) palmrest

3. Disconnect the smart-card and the USH cable from the system board. Remove the screws that secure the USH

board to the computer and remove it from the computer.

42