126 | Using the System Setup Program
Memory Operating Mode set to support Memory
mirroring.
Memory Operating Mode set to support Advanced ECC,
i.e. Lockstep, Chipkill.
Sets to support HyperTransport 1 specification.
Sets to support HyperTransport 3 specification.
This field controls the number of enabled all of cores in
each processor. By default, the maximum number of cores
per processor will be enabled.
This field controls the number of enabled 6 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
This field controls the number of enabled 8 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
This field controls the number of enabled 10 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
This field controls the number of enabled 12 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
Allows user the ability to disable the Probe Filter
chipset option from BIOS setup. There are some
applications that may have lower performance with
the chipset feature enabled.
Allows user the ability to enable the Probe Filter chipset
option from BIOS setup. There are some applications that
may have lower performance with the chipset feature
disabled.
The C1-E is enabled by default.
The C1-E is disabled by user in their own liability. There
will be warning message in both the BIOS Setup help text
and the pop up message when the option is changing.
