1. Enter system setup, select Boot Sequence from the System group. See System Setup Options.
2. Press <Enter> to access the menu.
3. Press the up- and down-arrow keys to highlight the appropriate Boot Sequence option.
4. Press the U or D key to move the option up or down in the boot sequence.
5. Press <Enter> to Save the changes or <Esc> to Cancel.
Clearing Forgotten Passwords and CMOS Settings
Jumper Locations
Clearing Password Settings
1. Follow the procedures in Before You Begin.
2. Locate the 2-pin password jumper (PSWD) on the system board (see Jumper Locations), and attach the jumper plug to pins 1 and 2 to clear the
password.
3. Replace the computer cover. See Replacing the Computer Cover.
4. Connect your computer and monitor to electrical outlets, and then turn them on.
5. After the Microsoft®Windows®desktop appears on your computer, shut down the computer. See Turning Off Your Computer.
6. Turn off the monitor and disconnect it from the electrical outlet.
7. Disconnect the computer power cable from the electrical outlet, then press the power button to ground the system board.
8. Remove the computer cover. See Replacing the Computer Cover.
9. Locate the 2-pin password jumper (PSWD) on the system board and attach the jumper to pin 1 to reenable the password feature.
10. Replace the computer cover. See Replacing the Computer Cover.
11. Connect your computer and devices to electrical outlets, and then turn them on.
