A SERVICE OF

logo

3. Install:
a. palmrest assembly
b. keyboard
c. memory module
d. hard drive
e. WLAN card
f. access panel
g. optical-disk drive
h. battery
4. Follow the procedures in After Working Inside Your Computer.
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. optical-disk drive
c. access panel
d. hard-disk drive
e. memory module
f. keyboard
g. palmrest assembly
3. Disconnect the following cables from the system board:
a. speaker and power cable (1)
b. display (LVDS) cables (2)
23