
Information Update 9
Dell Diagnostics and KVM Module With KVM-Over-IP (ACI
Port) PS/2-Mouse Acceleration Support
Dell Diagnostics and the KVM module with KVM-over-IP (ACI port) firmware do not support PS/2
mouse acceleration. If the mouse slide-accelerator adjustment is set at high or fast, the mouse
movement may become erratic. Ensure that the mouse slide-accelerator adjustment remains set at
low or none.
Server Module Daughter Card Status Indicator
Table 2-2 in the
Installation and Troubleshooting Guide
and Table 1-2 in the
User’s Guide
provide
information on how the server module front-panel daughter card status indicator behaves if a Fibre
Channel daughter card is installed. Table 1-1 provides information about how that indicator
behaves if a Gb Ethernet daughter card is installed.
Table 1-2 provides information about how this indicator behaves if an Infiniband daughter card is
installed.
Table 1-1. Server Module Status Indicator Behavior for Gb Ethernet Daughter Card
Indicator Icon Activity Indicator Indicator Code
Daughter card
status indicator
I/O Off A link does not exists.
Green A link exists.
Green blinking Activity on the Gb Ethernet daughter card.
Table 1-2. Server Module Status Indicator Behavior for Infiniband Daughter Card
Indicator Icon Activity Indicator Indicator Code
Daughter card
status indicator
I/O Off Infiniband daughter card is not installed.
Green Infiniband daughter card is present, but its driver has not yet
loaded.
Green blinking Infiniband daughter card is present, its driver has loaded,
and daughter-card data transfers are occurring.
R9289bk1.book Page 9 Friday, February 18, 2005 1:30 PM