A SERVICE OF

logo

Replacing the Base Cover | 29
10
Replacing the Base Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1 Slide the tabs on the base cover into the slots on the computer base and snap the
base cover into place.
2 Tighten the captive screw that secures the base cover to the computer base.
Postrequisites
1 Replace the battery. See "Replacing the Battery" on page 19.
2 Follow the instructions in "After Working Inside Your Computer" on page 11.
.
book.book Page 29 Wednesday, April 11, 2012 4:13 PM