-51-
143245 - Rotary Cutter 1020/1520 (30-March-2007)
141581 - Coupler, Tip (2)
141515 - Nipple, (2)
141504 - Elbow, 90°
141515 - Nipple
126666 - Hose, 3/8 x 192”
126667 - Hose, 3/8 x 246”
126503 - Hose, 3/8 x 82”
122850 - Center Height Cylinder,
(3-1/2” x 8” x 1-1/4”)
Hydraulic Schematics
Height Control Cylinders - 1520 Model
(Note: Cylinder details are shown on a separate page)
Wing Lift Cylinders - 1520 Model
(Note: Cylinder details are shown on a separate page)
141506 - Orifi ce Plate (2)
141581 - Coupler, Tip (2)
141515 - Nipple, (2)
126648 - Hose, 3/8 x 180” (2)
141513 - Elbow, 90°
141501 - Tee
141615 - Cap
•126668 - Hose, 3/8 x 264”
122859 - Vent, Filter (2)
126549 - Hose, 3/8 x 55”
•141504 - Elbow, 90° (2)
(Replaces Filter Vent)
•141581 - Coupler, Tip (2)
•141515 - Nipple, (2)
122875 - Wing Lift
Cylinder, (2)
(3” x 16” x 1-1/4”)
141504 - Elbow, 90° (2)
•501530 - Optional double-acting
wing lift kit available and shown
with dashed lines and italic font.
•141506 - Orifi ce Plate (2)
126546 - Hose, 3/8 x 40”
- An alternate hose routing for
combined wing lift is shown in
diagram below.
Cap
Elbow
Uncap Tee
- Standard hose routing for
independant wing lift is shown
in the diagram to the left.
Hose Routing Options
•126665 - Hose, 3/8 x 240”
122830 - Wing
Height Cylinder
(3” x 8”x 1-1/4”)
122836 - Wing
Height Cylinder
(3-1/4” x 8”x 1-1/4”)
141616 - Elbow, 45° (4)
126626 - Hose, 3/8 x 168”
