-41-
143245 - Rotary Cutter 1020/1520 (30-March-2007)
Center Frame Assembly
500805 - Tie Bar Clevis, Front (2)
118456 - Lock Nut, 1” UNC (2)
131020 - Flat Washer, 1” SAE (2)
500801 - Tie Bar Rod, 1” x 80” (2)
118973 - Bolt, 1/2” x 2-3/4” UNC (4)
500819 - Pin, 1-1/4” x 2-1/16” (4)
118729 - Lock Nut, 1/2” UNC GRC
Unitorque (4)
118530 - Lock Washer, 5/16” (4)
118731 - Flat Washer, 5/16” SAE (4)
160004 - Cone Shield, 9” Diameter (1)
118110 - Bolt, 5/16” x 1” UNC (4)
118378 - Bolt, 5/8” x 1-3/4” (6)
118447 - Lock Nut, 5/8” GRC-Unitorque (6)
500853 - Center Skid Shoe (2)
500600 - 3 Bolt Chain
Safety Bar (1)
500604 - 4 Bolt Chain
Safety Bar (5)
500813 - Pin, 1-1/4” x 4-7/8” (2)
118729 - Lock Nut, 1/2” UNC GRC Unitorque (2)
118901 - Lynch Pin, 3/16” x 1-1/2” (2)
118009 - Bolt, 1/2” x 1-1/4” UNC (2)
Center Driveline
160003 - (1000 RPM)
OR
160005 - (540 RPM)
See
Detail
See
Detail
See Detail
500800 - Complete Tie Bar, (no pins) (2)
500910 - Cable, 1/4”
x 18” (1)
500911 - Cable, 1/4” x 21” (2)
(Optional)
500913 - Cable, 1/4” x 65” (1)
(Optional)
118843 - Roll Pin,
1/4” x 1-1/2” (2)
500100 - Center
Frame
118537 - Flat Washer, 5/8” (4)
170011 - Splitter Gearbox 1000 RPM
OR
170021 - Splitter Gearbox 540 RPM
118447 - Locknut, 5/8” (4)
118843 - Roll Pin, 1/4”
x 1-1/2” (2)
118495 - Jam Nut, 1” Heavy (2)
500804 - Tie Bar Clevis,
Rear - Threaded (2)
118336 - Grease Fitting, 1/4” (2)
See Detail
117453 - Setscrew, 5/8” x 2-1/2” (4)
118964 - Carriage Bolt, 3/8” x 3” (23)
118511 - Flat Washer, 3/8” (23)
118417 - Lock Nut 3/8” UNC GR5 (23)
Use non-removable loctite
when replacing splitter box
bolt hardware.
133088 - Cap,
plastic (1)
