English
4
Installation
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Nothing Comes Close to a Cobra
®
5
Getting Started
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
P
1. Place the detector on the dashboard to nd a location
where the unit has a clear, level view of the road and is
parallel to the road’s surface. The angle CANNOT be
adjusted after mounting
2. Remove the paper backing
from one side of the hook-
and-loop fastener.
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener. You
can remove and
reattach the unit as often
as you like
5.
Plug the power cord into the
detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle’s
cigarette lighter.
Dashboard Mounting
Standby Screens
•
Testing
System Ready
On-Off/
Volume Control
Rotate clockwise
(away from you)
To Turn On the Unit and Adjust the Audio Volume
Rotate the On-Off/
Volume control
clockwise (away
from you).
Tone Voice Visual Display
Three beeps Testing, then
three beeps
System Ready
The display will
sequentially show the
settings for any user
modes you have
changed from the
factory defaults.
If the GPS Locator
is connected, the
sequence will continue
with the database
version, whether the
GPS is locked on a
signal and the speed
units in effect.
Start-up is complete when the display continuously
shows the letters indicating the current user settings
(c = City mode, h = Highway mode, i = IntelliMute On)
h
Start-Up Complete
Power On
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ig-
nition is Off. If this is the case with your vehicle, you should turn Off or unplug
your detector when parking for lengthy periods.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
